14
Operation
Wheel mode operations (almost identical to
the case of using the Microsoft
®
IntelliMouse
TM
for scroll, zoom, etc., operations) are possible
for Microsoft
®
wheel function-compatible ap-
plications.
Microsoft
®
IntelliMouse
TM
is a mouse-type de-
vice that, in addition to the two conventional
buttons, incorporates a wheel able to rotate
forwards/backwards.
Using the Touch Pad
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to handle the touch pad, refer to page 15.
The touch pad has the following two modes of operation.
Left Button
Right Button
Work Surface
Scrolling Area
Microsoft
®
IntelliMouse
TM
Wheel Mode
(Setting at the time of purchase)
Only scroll operation is possible for appli-
cations not compatible with the Microsoft
®
wheel function.
Even for applications compatible with the
Microsoft
®
wheel function, there are cases
where only vertical scrolling or only hori-
zontal scrolling is possible in this mode.
Scrolling side-to-side
Possible when a check mark
is added for [Horizontal].
Scrolling up/down
: Typical mouse operations use this area.
When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and [Verti-
cal] of [Scroll Configuration], the entire surface can be used for typical mouse opera-
tions.
Scrolling Area
Scrolling up/down
Possible when a check mark
is added for [Vertical].
For the Pan and Auto Scroll functions, the entire
work surface of the touch pad can be used for scroll-
ing.
Changing the mode of the touch pad
1
Select from the taskbar or select [Motion] in [Start] - [Settings] - [Control Panel] -
[Mouse].
2
To set the Microsoft
®
IntelliMouse
TM
Wheel mode
Add the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].
To set the original mode
Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration] and
add the check mark for [Horizontal] and/or [Vertical].
3
Press [OK].
NOTE
When you are not sure whether an application is compatible with the Microsoft
®
wheel
function or not, try using both modes. Furthermore, depending on the application, there are
cases where scrolling may not be possible with either mode.
Original Mode
Starting Up/Shutting Down
To Next Page
Loading...
