13
Operation
3
Select your application
You are able to start working on your computer.
The power saving function is factory set, so if there is no input from a key, the
touch pad, or the external mouse for two minutes, the power to the LCD is cut
(ECO mode).
The LCD will resume operation when the touch pad is used or a key is pressed.
[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] may contain a device or devices bearing an exclamation mark or ques-
tion mark. This does not indicate a malfunction. Such a mark (exclamation or
question mark) will not be displayed if the operating environment of the device
showing the mark is corrected, by for instance installing the driver of the device.
NOTE
If security indicator ( ) is displayed,
you must first enter your User Password. ( "Security Measures")
* If you are starting from the suspend mode (
Suspend/Hiber-
nation Functions"), if after three attempts the correct password is not in-
put, or if no password is entered for about a minute, the computer returns
to the suspend mode.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start*
(Power off)
Upon entering your
User Password and
pressing Enter .
When an application or file that was previously displayed ap-
pears on your screen,
To Next Page
Loading...
