Selecting the frequency band used for Wi-Fi
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ®
[Wi-Fi].
• Make sure that Wi-Fi is turned on.
2. Tap [Wi-Fi preferences] ® [Advanced] ® [Wi-Fi frequency band].
3. Select the desired setting.
Setting a portable Wi-Fi access point (certain models only)
You can use the unit as a Wi-Fi access point to connect other devices that are compatible with wireless
LAN to the Internet.
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ® [Hotspot
& tethering].
2. Tap the [Wi-Fi hotspot] switch to turn it on.
3. Tap [Set up Wi-Fi hotspot].
4. Configure the network name, security type, and password as desired, and then tap [SAVE].
Using peer-to-peer Wi-Fi connections (Wi-Fi Direct)
The unit can establish peer-to-peer connections with other devices that are compatible with Wi-Fi Direct.
This allows you to directly send and receive data between the unit and other devices without using a
wireless access point.
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ®
[Wi-Fi].
• Make sure that Wi-Fi is turned on.
2. Tap [Wi-Fi preferences] ® [Advanced] ® [Wi-Fi Direct].
3. Select the desired settings and functions as necessary.
• Available devices are displayed under [Peer devices].
24 Operating Instructions - Reference Manual
Connectivity
To Next Page
Loading...
