System
Allows you to configure the display and input language, date and time, backup, reset, etc. You can also
confirm information about the tablet, such as the status of the battery and the network, and the software
version.
Power options menu
You can press and hold (power button) to display the power options menu. From here, you can perform
or set the following commonly-used features.
– Power off
– Battery Warm Swap (page 14)
– Restart
– Touch operation mode (page 32)
[Dashboard] app
The [Dashboard] app provides quick access to various unit features. You can use this app to perform the
following.
– Change screen brightness
– Change speaker volume
– Confirm battery level
– Enable and disable airplane mode, Wi-Fi, WWAN (mobile network connections) (certain models
only)
*1
, Bluetooth, location information, screen auto rotation, microphone
*1
.
– Launch apps
*1
This item is not displayed by default; you can add it to [Dashboard] if desired.
Using [Dashboard]
1. Swipe up the home screen, and then in the app list, tap [Dashboard].
2. Operate the desired function.
Note
• Features that have been disabled using the [DeviceManagement] app (see
“[DeviceManagement] app” (page 28)) are not available in [Dashboard].
Adding and deleting tiles
You can add up to 12 tiles.
1. Swipe up the home screen, and then in the app list, tap [Dashboard].
2. To add tiles
Tap [MENU] ® [Add], select the desired tile type, and then follow the on-screen instructions.
• Two types of tiles are available.
– [Toggles]: Tiles that allow you to enable or disable certain features.
– [Application]: Tiles that allow you to launch a specific app.
To remove tiles
Tap and hold the desired tile, and then tap [YES].
To change the color theme
Tap [MENU] ® [Skin], select the desired theme, and then tap [OK].
Importing and exporting [Dashboard] settings
1. Swipe up the home screen, and then in the app list, tap [Dashboard].
30 Operating Instructions - Reference Manual
Settings
To Next Page
Loading...
