- 18 -
Selecting channel
1. Select DVB or Analogue with TV.
●
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing TV repeatedly.
2. Select a channel with Channel Up / Down or Numeric buttons.
●
DVB channel position begins from number 1 upward. Analogue channel
position numbers are in the 0 - 99 range.
■ To select a channel using information banner
1. Display information banner with if it is not displayed.
2. Select a channel with
/ and press OK to watch while the banner is
displayed.
Watching > Basic > Information banner
■ To select a channel using TV Guide
1. Display TV Guide with GUIDE.
2.
Select the current programme with / / / and press OK to access.
– The current programme is displayed on the top left of the screen.
3. Press OK to exit TV Guide.
Watching > TV Guide > Using TV Guide
■ To select the type of channel list
Automatically selects all channels or favourites list in the information banner
when the TV is turned on.
1. Display the menu with MENU.
2. Select Setup > Other Settings > Power on Channel List with
/ and
press OK to access.
3. Select All Channel List / Last with
/ and press OK to set.
■ To watch pay-TV
●
For information of the encrypted channels
Functions > Common Interface > Using Common Interface
●
Consult the operator / broadcaster or CI module manufacturer for more
information and conditions of the services.
To Next Page
Loading...
