Panasonic TX-L32E6E - Specifications

Specifications
Power Source: 220-240V AC, 50 / 60Hz
Rated Power Consumption: 80W
Stand-by Power Consumption: 0.20W
Aerial Impedance: 75 unbalanced, Coaxial Type
Receiving System: DVB-T Digital terrestrial services (
MPEG2 and MPEG4-AVC(H.264))
DVB-C Digital cable services (
MPEG2 and MPEG4-AVC(H.264))
PAL I/H, B/G,
SECAM B/G, L/L’
VHF E2-E12 VHF H1-H2 ( ITALY )
VHF A-H ( ITALY ) UHF E21-E69
CATV (S01-S05) CATV S1-S10(M1-M10)
CATV S11-S20 (U1-U10) CATV S21-S41 (HYPERBAND)
PAL D/K,
SECAM D/K
VHF R1-R2 VHF R3-R5
VHF R6-R12 UHF E21-E69
PAL 525/60 (AV only)
M.NTSC (AV only)
NTSC (AV only)
Aerial - Rear:
VHF/UHF
Operating Conditions: Temperature: 0°C  35°C
Humidity: 20%  80% RH (non condensing)
Terminals:
AV1 IN Video (21 pin) 1V p-p 75
Audio (21 pin) 500mV rms 10k
RGB (21 pin) 0.7V p-p 75
AV1 OUT Video (21 pin) 1V p-p 75
Audio (21 pin) 500mV rms 1k
AV2 IN Video (RCAx1) 1V p-p 75
(COMPONENT/VIDEO) Audio (RCAx2) 500mV rms 10k (used for HDMI_ AV2 audio IN)
Video (RCAx3) Y:1V p-p 75 (including synchronization)
Pb, Pr: ±0.35V p-p 75
HDMI1, HDMI2, HDMI3 Type A Connectors
HDMI
1/3 : Content Type, Deep Colour
HDMI 2 :Content Type, Audio Return Channel, Deep Colour
This TV supports “HDAVI Control 5” function.
DIGITAL AUDIO OUT PCM / Dolby digital / DTS, Fiber optic
USB 1/2 USB 2.0 DC 5V Max 500mA
ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX
CARD SLOT Common interface slot (Complies with CI+) x1
Wireless LAN:
Standard Compliance IEEE802.11a/n , IEEE802.11b/g/n
Frequency Range IEEE802.11a/n: 5.180 GHz – 5.320 GHz
5.500 GHz – 5.580 GHz
5.660 GHz – 5.700 GHz
IEEE802.11b/g/n: 2.412 GHz – 2.472 GHz
Security WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP(64 bit/128 bit)
9