- 56 -
the TV will tune to the correct channel even if the TV is in Standby mode.
●
Not valid in Analogue mode
1. Display the TV Selection screen with TV
2. Select the mode with
/ and press OK to set
DVB-S / DVB-C / DVB-T
3. Display the menu with MENU
4. Select Timer
Timer Programming with / and press OK to access
■ Set timer programming event details
1. Press OK to start making the settings
2. Select USB HDD Rec. / Reminder with
/
USB HDD Rec.:
Records the programme to the USB HDD.
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 minutes before the
starting time, a reminder message appears if you are watching TV.
Reminder:
Reminds you to watch the programme.
When you are watching TV, a reminder message appears 2 minutes
before the starting time. Press OK to switch to the programmed
channel.
3. Select the item (channel, date and starting / ending time) with
/ and
set / / with /
●
and can also be entered with numeric buttons.
(Example)
!: Overlapped timer programming events
To Next Page
Loading...
