Panasonic TX-L32S10B - User Manual

To Next Page

Service Manual

Colour LCD Television

TX-L32S10B

TX-L32S10E

TX-L32S10L

TX-L37S10B

TX-L37S10E

TX-L37S10L

TX-LF32S10

TX-LF37S10

Specifications

(Informations in brackets [ ] refers to model 32”)

Power Source: 220-240V AC, 50Hz

Power Consumption 130W [115W]

Stand-by Power Consumption: 0.3W (Without monitor out recording)

13W (With monitor out recording)

Aerial Impedance: 75Ω unbalanced, Coaxial Type

Receiving System: S10B S10E,S10L,LFS10

PAL-I PAL-I/H, B/G, D/K

PAL-525/60 (AV only) SECAM B/G, D/K, L/L’

DVB-T (via UHF aerial input) PAL-525/60 (AV only)

M.NTSC (AV only) DVB-T (via VHF/UHF aerial input)

NTSC (AV only) DVB-C (Digital cable services)

M.NTSC (AV only)

NTSC (AV only)

Receiving Channels: S10B S10E,S10L,LFS10

UHF E21-E68 VHF E2-E12 VHF H1-H2 (ITALY)

VHF A-H (ITALY) VHF R1-R2

VHF R3-R5 VHF R6-R12

UHF E21-E69 CATV (S01-S05)

CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)

CATV S21-S41 (Hyperband) VHF A-J (IRELAND)

Operating Conditions: Temperature: 0°C ÷ 35°C

Humidity: 20% ÷ 80% RH (non condensing)

PC signals: VGA, SVGA, XGA, SXGA(compressed)

Horizontal scanning frequency 31 – 69 kHz

Vertical scanning frequency 59 – 86 Hz

ORDER No. PCZ0903045CE

Unauthorized copying

and

distribution is a violation of law.

GLP24 Chassis

Need help?

Do you have a question about the Panasonic TX-L32S10B and is the answer not in the manual?

Summary

Product Specifications

Electrical and Environmental Specs

Safety and Handling

General Service Safety Guidelines

Essential safety instructions for servicing the equipment.

Touch-Current Measurement Procedure

Details procedures for measuring touch currents to ensure user safety.

ESD Prevention Techniques

Outlines methods to protect sensitive devices from static discharge damage.

Important Safety Component Notice

Highlights critical safety components and replacement guidelines.

Service and Maintenance Procedures

Service Hints (Disassembly)

Guidance on basic disassembly procedures like removing the backcover and stand.

Chassis Board Layout

Setting Inspection (Voltage Checks)

Lists test points and expected voltages for confirming power supply operation.

Self Check and Troubleshooting

Service Mode and Option Bytes

Adjustment Method (Picture Calibration)