E
NGLISH
3
Storage and Cleaning
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that
is covered in dust or dirt may scratch the
eyewear. Shake off any dust from the cloth
before use.
Do not use benzene, thinner, or wax on the
3D Eyewear, as doing so may cause the paint
to peel off.
Avoid storing the 3D Eyewear in hot or highly
humid locations.
Troubleshooting/Q&A
Check the followings fi rst.
Images are not 3D.
Does the TV support on this 3D Eyewear? ►
Use the 3D Eyewear with compatible TVs.
(
page 2)
Are the image settings switched to 3D ►
images?
Refer the television operating instructions.
Specifi cations
Lens type
circularly-polarized fi lter
Usage temperature range
0 °C - 40 °C (32°F - 104°F)
Materials
Main body: Resin
Lens section: Resin
Dimensions
Width 165.0 mm
Height 38.0 mm
Overall length 166.0 mm
Mass Approx. 18
g
To Next Page
Loading...
