Panasonic TY-SB01QS - Page 6

English
6
Video settings
Byinstallingthisproductinacompatibledisplayand
settingthedisplay’sinputto[SLOT],videosettingcan
bemade.
Note
●
Somedisplaysarenotsupported.
Thesettingcanbemadeon[Signal]forthemainunit
menu.
■ [SDI format select]
Selectthe12G-SDI/3G-SDI/HD-SDIformat.
[Auto]:
Automaticallydetectstheinputsignalformat.
[4:2:2 YC
BCR 10bit], [4:4:4 YCBCR 10bit],
[4:4:4 RGB 10bit], [4:2:2 YCBCR 12bit],
[4:4:4 YC
BCR 12bit], [4:4:4 RGB 12bit]:
Ifthevideoisnotcorrectlydisplayedbecause
thePayloadIDisnotsuperimposedorforother
reasons,theaboveformatscanbeselected
manually.Notethatsomeinputsignalsmaynotbe
supported.
■ [Signal range]
Switchesthedynamicrangetomatchthesignals.
[Auto]:
Switchesthedynamicrangeautomaticallybetween
[Video(16-235)]and[Full(0-255)]accordingtothe
inputsignal.
[Video(16-235)]:
Iftheinputsignalisthevideorange.
[Full(0-255)]:
Iftheinputsignalisfullrange.
■ [Dynamic range]
Switchesthedynamicrange.
[Auto]:
SetsautomaticallyaccordingtothePayloadID
information.
[HDR(PQ)]:
SetsthedynamicrangeincompatiblewithHDR
(PQ(PerceptualQuantization)).
[HDR(HLG)]:
SetsthedynamicrangeincompatiblewithHDR
(HLG(HybridLogGamma)).
[SDR]:
SetsthedynamicrangeincompatiblewithSDR.
■ [Colour gamut]
Switchesthecolourgamut.
[Auto]:
Setsthecolourgamutautomaticallyaccordingto
theITU-2020emu.informationofPayloadID.
[Native]:
Displayswiththecolourspaceuniquetothisunit.
[ITU-2020 emu.]:
DisplayswiththecolourspaceclosetotheITU-R
BT2020standard.
■ Input signal display
Displaythefrequencyofthesignalcurrentlybeing
inputandthetypeofsignal.
60.00 Hz
594.00 MHz
3840x2160/60p
135.00 kHz
H-freq.
V-freq.
Dotclockfreq.
Signalformat
Status
[Status]:
Iftheinputsignalhasanyofthefollowingerrors,a
messageisdisplayed.
[No ID]
PayloadIDhasnotbeensuperimposed.
[ID]
PayloadIDdoesnotmatchthehorizontal/vertical
informationofSDIsignal.
[CRCC]
DisplayedwhenCRCCerroroccursduetopoor
signalquality,etc.(Ahigh-frequencycablesuchas
5C-FBmaynotbeusedfortransmission.)
Note
●
IfthereisnovideosignalintheSDIinput,afull
bluescreenisdisplayed.Ifasignalunsupported
bythisproductisinputtotheSDIinput,afullcyan
screenisdisplayed.