Panasonic KX-TDE0101

Model No. KX-TDE0101/KX-TDE6101
IP Convergence Main Processing Card
MPR Card Conversion Guide
In this manual, the suffix of each model number is omitted (e.g., KX-TDE100NE).

Panasonic KX-TDE0101 Specifications

General

Power Supply	AC 100-240 V, 50/60 Hz
Humidity	10 % to 90 % (non-condensing)
Category	PBX System
Operating Temperature	0°C to 40°C
Series	KX-TDE

Summary

1 Preparation

1.1 Safety Notices

Observe safety notices to avoid danger to users, people, and prevent damage to property.

1.2 Introduction

Describes procedures for upgrading Hybrid IP-PBX to Pure IP-PBX by replacing the MPR card.

1.2.1 Requirements for Upgrade

Details system software version and SD Memory Card requirements for upgrading Hybrid IP-PBX to Pure IP-PBX.

2 Upgrading from a Hybrid IP-PBX to a Pure IP-PBX

2.1 Procedure

Step-by-step guide for upgrading the system software from a Hybrid IP-PBX to a Pure IP-PBX.

2.2 Data Reset After Upgrade

Lists data items stored in PBX SRAM that are cleared during the upgrade process.

3 Restoring a Pure IP-PBX to a Hybrid IP-PBX

3.1 Procedure

Steps to revert from a Pure IP-PBX back to a Hybrid IP-PBX if the upgrade was unsuccessful.