To Next PageTo Next PageWhy is there dewdrop near the air discharge of my Panasonic U-100PE1E5 Air Conditioner?
If you observe dewdrops accumulating near the air discharge of your Panasonic Air Conditioner during operation, it's likely because indoor moisture is being cooled by the cool air. This accumulation of moisture leads to the formation of dewdrops in that area.
Why is the wind direction changing automatically on my Panasonic U-100PE1E5 Air Conditioner?
If your Panasonic Air Conditioner's wind direction changes on its own, the wind direction setting cannot be adjusted, or the wind direction cannot be changed, it could be due to the unit automatically setting a horizontal wind flow when the air discharge temperature is low or during defrost operation. The flap position might also occasionally be set up individually.
Why does the flap move multiple times when I change the wind direction on my Panasonic Air Conditioner?
When you change the wind direction on your Panasonic Air Conditioner and the flap operates several times before stopping at the designated position, it's because the flap operates after searching for a standard position.
Why does the fan on my Panasonic Air Conditioner sometimes rotate faster at the beginning?
At the initial high-speed operation of your Panasonic Air Conditioner, the fan may sometimes rotate faster than the setting speed for 3 to 30 minutes. This is for an operation check to confirm whether the fan motor rotation is within the use range.
Why does the outdoor fan keep running after I turn off my Panasonic Air Conditioner with the remote?
When you stop your Panasonic Air Conditioner with the remote controller, the outdoor unit fan may continue to operate for a while even after the outdoor compressor has stopped. This is because the fan's rotation helps the unit to operate smoothly.
General| Brand | Panasonic |
|---|---|
| Model | U-100PE1E5 |
| Category | Air Conditioner |
| Language | English |
Identifies key components of the indoor units, including the U1 type (4-Way Cassette) and F1 type (Low Silhouette Ducted).
Provides guidance on using the optional wireless remote controller for various indoor units.
Explains the usage of the optional wired timer remote controller for indoor unit operations.
Details the 'DRY' mode functionality, including automatic cycling and fan speed limitations.
Covers heating performance, low-temperature efficiency, and cold draft prevention during heating.
Explains the automatic defrost cycle for the outdoor unit and its indicators during cold weather.
Lists common symptoms like noise, odor, and fog, along with their causes for indoor units.
Details symptoms such as no operation, noise, and steam, and their corresponding causes for outdoor units.
