G
garciachristopherSep 4, 2025
Why is the outdoor unit fan on my Panasonic Air Conditioner still running after I turn it off with the remote?
- AAlbert TorresSep 4, 2025
Fan rotating makes operation smoothly.
To Next PageTo Next PageWhy is the outdoor unit fan on my Panasonic Air Conditioner still running after I turn it off with the remote?
Fan rotating makes operation smoothly.
Why is the fan still running after I turn off my Panasonic Air Conditioner?
If your Panasonic Air Conditioner's fan continues to rotate even after it stops operating, this is normal. This function helps to ensure smooth operation. Also, the fan may sometimes rotate to dry the heat exchanger due to settings.
Why is my Panasonic Air Conditioner discharging dust?
Dust accumulation inside the indoor unit is being discharged.
Why is there dewdrop on my Panasonic U-12ME1E81 Air Conditioner?
Indoor moisture is cooled by cool wind and accumulated by dewdrop.
Why does the flap operate several times and stops at designated position when I change the wind direction on my Panasonic U-12ME1E81?
When the wind direction is changed, the flap operates after searching for a standard position.
Why won't the wind direction change on my Panasonic U-12ME1E81?
The wind direction on your Panasonic Air Conditioner may not change because when the air discharge temperature is low or during defrost operation, horizontal wind flow is made automatically. Also, the flap position may occasionally be set up individually.
Why does the fan on my Panasonic U-12ME1E81 keep running after I turn it off?
The fan in your Panasonic Air Conditioner may continue to rotate after operation stops to ensure smooth operation or because it's drying the heat exchanger due to specific settings.
Why is my Panasonic Air Conditioner emitting fog?
If your Panasonic Air Conditioner is emitting fog, it could be due to a dirty heat exchanger inside the unit, requiring cleaning. Also, fog can appear during defrost operation. If the unit inside (heat exchanger) is dirty, consult your dealer as technical engineering is required.
Why does my Panasonic U-12ME1E81 smell?
Your Panasonic Air Conditioner might smell because indoor odor components like cigarette or cosmetic odors have accumulated and are being discharged. It could also be due to a dusty unit inside. In both cases, it is recommended to consult your dealer.
Why does my Panasonic U-12ME1E81 Air Conditioner sound like water is running?
The sound of streaming water you hear is likely the sound of refrigerant liquid flowing inside the unit during or after operation or the sound of drainage water through the drain pipe.
General| Brand | Panasonic |
|---|---|
| Model | U-12ME1E81 |
| Category | Air Conditioner |
| Language | English |
Alerts to hazards resulting in severe injury or death.
Alerts to hazards causing personal injury or property damage.
Covers potential hazards during operation, electrical safety, and handling.
Specific advice on wet hands, flammable substances, and ventilation.
Specifies temperature ranges for cooling and heating modes.
Guidelines for responsible collection and disposal of old products and batteries.
Identifies key components of Y2 and K2 type indoor units.
Information on wireless and wired remote controllers.
Explains start/stop, mode selection, fan speed, and temperature settings.
Describes how to control multiple indoor units simultaneously.
Explains how to set flap positions and activate swing.
Details on stopping and repositioning the airflow flap.
How to set airflow for Y2 type cassette units.
How to set vertical and horizontal airflow for K2 units.
How to adjust airflow for multiple indoor units using a single wired controller.
Details on DRY, Heating, and Defrosting operations.
Essential safety steps before and during cleaning.
Instructions for cleaning front panel, air filters, and indoor unit.
How to clean air filters and reset the filter indicator.
Common symptoms and causes for indoor unit issues.
Common symptoms and causes for outdoor unit issues.
Steps to check before contacting service for operational issues.
Advice on optimizing performance and reducing energy consumption.
Detailed specifications for K2 type wall-mounted units.
Detailed specifications for Y2 type 4-way cassette units.
Detailed specifications for LE1 type mini units.
Detailed specifications for ME1 type 2WAY units.
Detailed specifications for MF1 type 3WAY units.
Detailed specifications for MF2 type 3WAY units.
