What to do if I turn off the Panasonic Heat Pump immediately after 'STOP' setting?
If the power is turned off immediately after performing a 'STOP' setting, the entire Panasonic Heat Pump system will stop. In this case, it is recommended to recover the system.
What happens if I open the shutoff valve on my Panasonic Heat Pump?
Opening the shutoff valve can cause refrigerant to flow from one outdoor unit to another in your Panasonic Heat Pump system, which may result in serious malfunction. In this case, it is recommended to recover the system and start over.
Describes the GHP system, its engine, and advantages.
Details warranty periods and inspection contract menus for long-term use.
Explains the outdoor main board switches, LEDs, and basic operational keys.
Covers backup operation, engine stop/start, oil time reset, coolant circulation, and test runs.
Covers engine oil replenishment, filter replacement, and service schedules.
Details valve clearance adjustment, sparkplug replacement, and air cleaner service.
Covers coolant levels, compressor/generator belts, and drain filter stones.
Explains gas leak inspection and control program version checks.
General| Energy Efficiency Class (Cooling) | A++ |
|---|---|
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
To Next Page