To Next PageTo Next Page
What to do if I turn off the Panasonic Heat Pump immediately after 'STOP' setting?
If the power is turned off immediately after performing a 'STOP' setting, the entire Panasonic Heat Pump system will stop. In this case, it is recommended to recover the system.
What happens if I open the shutoff valve on my Panasonic Heat Pump?
Opening the shutoff valve can cause refrigerant to flow from one outdoor unit to another in your Panasonic Heat Pump system, which may result in serious malfunction. In this case, it is recommended to recover the system and start over.
General| Brand | Panasonic |
|---|---|
| Model | U-25GE2E5 |
| Category | Air Conditioner |
| Language | English |
Introduction to the GHP system, its advantages, and power consumption.
Details on the warranty period and the menu for periodic inspection contracts.
Diagram of switches and LEDs on the outdoor main board for diagnostics.
Procedure for backup operation of W MULTI units during maintenance.
Steps for safely stopping the engine and canceling the stop.
How to reset engine oil use time and operate the fuel gas solenoid valve.
Procedure to forcibly operate the coolant pump and three-way valve.
Guide to setting engine speed and conducting test runs.
Detailed steps for replacing engine oil and the oil filter.
Schedule for engine oil inspection, replenishment, and replacement.
Procedure for adjusting the engine's valve clearance.
Steps for replacing the sparkplugs on the engine.
Procedure for replacing the air cleaner element.
Instructions for checking and topping up the coolant level.
Detailed steps for replacing the compressor drive belt.
Procedure for inspecting and refilling drain filter filling stones.
Steps for replacing the generator belt.
Procedure for checking fuel line connections for gas leaks.
Procedure for checking and updating the control program version.
List of replacement parts categorized by model and replacement rank.
Checklist for periodic inspection and replacement, including data recording.
