To Next PageTo Next PageWhy is my Panasonic U-60PE1E5A Air Conditioner not cooling or heating properly?
If your Panasonic Air Conditioner isn't cooling or heating well, check if the air intake or outlet of the indoor and outdoor units is blocked with dust and remove any dust. You can also try setting the fan speed to “High” or “Strong”.
What to do if my Panasonic U-60PE1E5A does not turn on?
If your Panasonic Air Conditioner isn't turning on, even though it's plugged in, first, press the power ON/OFF button on the remote controller. Also check the breaker. If the breaker is turned off, turn the power on. If the breaker has been tripped, consult your dealer without turning it on.
Why is my Panasonic U-60PE1E5A making noise?
There are several reasons why your Panasonic Air Conditioner might be making noise. It could be due to the sound of refrigerant liquid flowing inside the unit, drainage water moving through the drain pipe, or temperature changes affecting the unit's parts. Indoor odor components, cigarette odor, and cosmetic odor accumulated in the air conditioner and its air is discharged. Also, if the unit inside is dirty, especially if it's been installed in a place with a lot of oil mist, it may require cleaning by a dealer. Other causes include defrost operation, smooth fan rotation, the fan drying the heat exchanger, horizontal wind flow during heating or defrost, flap movement, dust discharge, or operation checks.
General| Cooling Capacity | 6.0 kW |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| SCOP | 4.0 |
| Type | Split Type |
| Power Supply | 220-240 V, 50 Hz |
Guidance on proper installation, including voltage checks and location considerations.
Requirements for electrical wiring, grounding, and the need for a qualified electrician.
Instructions for preparing the unit for operation, including warm-up procedures.
Guidelines for responsible disposal of electronic products and batteries according to regulations.
Identification of components for various indoor unit types (U1, T2, F1).
Identification of components for various outdoor unit types (PE1, PEY1).
Explanation of how the unit functions, including heating performance and defrosting.
Instructions for adjusting airflow direction using the timer remote controller.
Instructions for adjusting airflow direction using the wireless remote controller.
Guidance on optimal vertical airflow settings for heating and cooling modes.
Instructions for manually adjusting the horizontal airflow vanes on T2 type units.
Recommendations for optimizing energy efficiency, such as filter cleaning and closing openings.
Procedures for cleaning the indoor unit, including the air outlet flap.
Troubleshooting guide for common issues before contacting a dealer.
Diagnosing and resolving common noise, smell, and airflow issues with the indoor unit.
Troubleshooting common issues related to the outdoor unit operation.
