® ® ® e e v e s " "
1. Complete the peripheral connections before turning on 1 Language setting
LCD TV. _ Selects OSD menu language from English, Spanish, or
2. Connect LCD TV's AC Power Cord into an AC outlet. French.
3. Press POWER button on Side Control of LCD TV or use
Remote Control to turn it ON.
The POWER indicator will light up (Red).
4. Press POWER button again to enter stand-by status, the
POWER indicator will be turned off.
- _ e 0 0
Press INPUT button of Remote Control or Side Control to
select mode TV, Video, HDMI, or PC.
Press USB button of Remote Control to enter USB content.
2 Viewing mode
Selects screen size among '9 ust", "Zoom", "Full", "4:3", or"H-Fill"
by pressing _ FORMAT button on Remote Control.
000 [Just]
Stretches to justify the 4:3 image to
0 0 the four corners of the screen.
OC_( 0 [Full]
Enlarges the 4:3 image horizontally to
the screen's side edges.
Displays the image at the standard 4:3
without distortion.
_ _ [Zoom]
Enlarges the 4:3 image to the entire
screen.
[H-Fill]
Enlarges the 4:3 image horizontally to
the screen' side edges.
The side edges of the image are cut
off.
Note:
® 480i(4:3)/480p(4:3):
Full, JUST, 4:3, Zoom
_' 720p(16:9)/1080i(16:9)/1080p(16:9):
Full, H-Fill, 4:3, JUST, Zoom
Note:
_ If you selected Store demonstration, a message asks you
to confirm your selection. Select Yes to continue, or select
No to change your viewing mode.
@ Store demonstration is not an energy-saving mode.
3 Tuner setting
To Next Page
Loading...
