1 Remote Control Signal Receiver
_ Do not place any objects between the TV
remote control signal receiver and remote
control,
2 Power indicator
On: Power indicator lights Red.
Standby: Power indicator turns off.
3 VOL +/-
_ Used to change volume.
_ Used to adjust the value of the selected item
on On-Screen Menu,
4 CN A/T
_ Used to change channels,
_ Used to select item on On-Screen Menu.
5 MENU
_ Open or close the On-Screen Menu.
6 iNPUT/OK
1 _ Use to select an input source.
_ Confirm and enter a selection.
7 POWER
_ Use to turn the TV On or Off.
1 HDMI
_ Connect all kinds of HDMI output equipment,
2 VIDEO IN
_ Connect video and audio output from video
equipment.
3 AUDIO IN
_ Connect the audio for a computer or a DVI
device,
4 DIGITAL AUDIO OUT
_ Connect an audio amplifier to this jack,
5 PC
_ Connect computer outputs to this terminal.
_ Connect an audio cable to AUDIO IN and
audio out jack on the computer.
6 ANTENNA/CABLE IN
_ Connect an antenna or cable TV.
7 USB
_ Connect USB memory to this terminal to play
Multimedia.
123 4 5 6
To Next Page
Loading...
