36
ow to Use u Functions
[] Menu list
Menu item
Reset to defaults*
Picture mode
Contrast, Brightness,
Color, Tint, Sharpness
imt.
x.v.Color
Photo enhancement
C.A.T.S.
Video NR
Blur reduction
Pro settings
Screen format
HD size
H size
adjustments
HDMflDVl RGB range
(HDMI 1-3)
3D Y/C filter
Color matrix
Block NR
uito NR
Black level
pulldown
24p Direct in
Reset to defaults*
Bass
Treble
Balance
A.I. sound
Surround
Bass boost
Volume leveler
TV speakers
HDMI 1 in
HDMI 2 in
HDMI 3 in
Sleep, Timer 1-5
Adjust ments/Configu rations (alternatives)
Resets all picture adjustments to factory default settings except for "Advanced picture".
Basic picture mode. (p. 59)
2D mode: (VividlStandardlTHXlGamelCustom)
3D mode: (VividlStandardlCinemalGamelCustom)
*_Each setting will be retained independently.
Adjusts the color, brightness, etc. for each picture mode to suit your taste
*_Display range ContrastlBrightnesslColorlSharpness: 0 - 100
Tint -50 - +50
Selects a choice of Coot (blue), Normal, or Warm (red) color. (Cool 2/Cool l/Normal/Warm l/Warm 2)
On: Enhances green and blue color reproduction, especially outdoor scenes. (Off/On)
Auto: Provides the appropriate picture when images corresponding to "x.v.Color" are input
via the HDMI input of this TV. (Off/Auto)
Provides appropriate picture when still images are input. (On/Off)
* "x.v.color" will not work if "On" is set.
Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (OfflWeaklMediumlStrong)
Improves the moving picture resolution. (Off/On)
Adjust the "Picture mode" setting in more detail. (p. 60)
when "Custom" or "Photo" is selected.)
Changes the format (aspect ratio). (FULLIH-FILLIJUSTI4:31ZOOM)
ou choose the aspect depending on the format of received signal. (p. 57)
Selects between 95 % (Size t) or 100 % (Size 2) for the scanning area with High-definition signal. (Size l/Size 2)
Select "Size 1" if noise is generated on the edges of the screen.
*_,Size 1: Selected item for "HD size". Scanning 95 %
** Size 2: Selected item for "HD size". Scanning 100 %
Adjusts the horizontal display range to reduce noise of both side edges of an image. (Size l/Size 2)
usts size accordinc aect mode to reduce noise. (p. 60)
Adjusts vertical alignment and size when aspect setting is "ZOOM"
Sets PC display (p. 34)
Prevents the blown out highlights and blocked up shadows when a wide-range signal is received.
Selects between standard RGB range (16-235 bits) or non-compliance (0-255 bits).
(16-235)/Nonstandard)
depending on the HDMI signal information.
Minimizes noise and cross-color in the picture. (Off/On)
Selects image resolution of component-connected devices (SD/HD)
** SD: Standard Definition HD: High Definition **Only used with 480p video signal.
Reduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Reduces HDTV flicker noise in the contoured sections of an image (Off/On)
Selects Dark or Light. Valid only for external input signals. (Dark/Light)
Adjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
48Hz: Achieves more cinematic playback by reproducing the movie contents at twice the
speed of 24 frames per second. (60Hz/48Hz}
Resets Bass, Treble, and Balance adjustments to factory default settings.
Increases or decreases the bass response.
Increases or decreases the treble response.
Emphasizes the left / right speaker volume.
Equalizes overall volume levels across all channels and external inputs. (Off/On)
Enhances audio response when listening to stereo. (Off/On)
Enhances bass sound and provides powerful sound. (Off/On)
Minimizes volume disparity after switching to external inputs.
Switches to "Off" when using external speakers (Off/On)
** "A.I. sound", "Surround", "Bass boost" and "Volume leveler" do not work if "Off" is selected.
The default setting is "Digital" for the HDMI connection. (Digital input signal)
Select audio input terminal when DVI cable is connected. (Analog audio input signal)
(Digital/Component l/Component 2/Video INideo 2)
The TV can automatically turn On/Off at the designated date and time. (p. 54)
[] Menu list
Menu item
Closed caption
Adjust ments/Configu rations (alternatives)
Locks the channels and programs. (p. 48)
Displays subtitles (Closed caption) (p. 52)
Set the 3D settings (p. 22)
Sets the mode to select the channel with the Channel up/down button.
(AIIIFavoritelDigital only/Analog only)
** Favorite: Only channels registered as FAVORITE. (p. 20)
Selects the screen menu language.
Adjusts the clock. (p. 17)
Sets channels. (p. 51 )
Selects the terminal and label of the external equipment. (p. 53)
Prevents "image retention" with Wobbling. (Automatic/Periodic)
*_,Automatic: Shifts the display image automatically.
** Periodic: Shiftsthe display imageevery (1/2/3/4)minutesaccording towhat wasset inthe "Time(minutes)"menu.
Sets the time for the "Pixel orbiter-Periodic" setting. (1121314)
Changes the brightness of the side bar (OfflDarklMidlBright) (4:3 mode only)
** The recommended setting is "Bright" to prevent the panel "Image retention". (p. 60)
Press "OK" to start the horizontal "Scrolling" on the screen. (p. 60)
Sets Network settings (p. 44)
Controls the equipment connected to HDMI terminals. (Off/On) (p. 40)
** "Power off link", "Power on link", "Energy saving mode", "Unselected device energy save"
and "Default speakers" cannot be selected if "Off" is set.
Sets "Power on link" of the HDMI connected equipment. (No/Yes) (p. 40)
Sets "Power off link" of the HDMI connected equipment. (No/yes) (p. 40)
Sets "Energy saving mode" of the HDMI connected equipment. (Quick start/Save) (p. 40)
UnseleQted device Sets "Unselected device energy save" of the HDMI connected equipment. (p. 40)
(No (stay on)/yes (with prompt)/Yes (no prompt)}
Selects the default speakers. (TV/Theater) (p. 40)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off}
Note
** Not in use when "Auto power on", "On/Off Timer" or "Lock" is set, or while "SD mode" or "Digital
Channel" is selected.
** "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No signal for 10 minutes".
** The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
® Not in use when "Auto power on" or "On/Off Timer" is set, or while "PC inputs" is selected.
** "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
*_The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 19)
U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain})
Turns TV On automatically when the cable box or connected device is turned On (No/yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
** The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 54)
Sets the media contents or playback type to play back SD cards automatically.
Slideshow/PhotoslVideoslMusiclSet later/Off)
Restarts the first time setup from "Language" setting. (p. 14)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings. (p. 50)
Auto power on
Image viewer
auto play
First time setup
About
Reset to defaults
[] Sub menu list
..... ISle to _ Channel up/down button.
l;nannel surf mocle I(AII/Favorite/Digital only/Analog only)
et favorite pets favorite channels_p. 19)
dit CH caption I_on identifier. (p. 51)
ignal meter Checks the signal strength if interference or freezing occurs on a digital image. (p. 51 )
_ In the AV mode, the Audio and Setup menus give fewer options.
* Confirmation screen is displayed. Select "Yes" and press OK to reset.
®
A'T"
-O ©
_c
cLOD
r-
-.C-_O')
37
To Next Page
Loading...
