First
[] Press to return to
the previous screen
RETURN
Time Setup
Configure Network settings
_i>Select the Network type
Set later: Go to 0
You can set in "Setup" menu (ater.
Wireless (WiFi): Start "Wireless network" (p. 17)
Select the setting mode Automatic: Press OK to start setup automatically.
Error screen is displayed when
Network connection has failed,
Manual: Go to Manual setting,
IAut°matlc I
Start connection test
I Connection test I
Connection
@ Complete "Network settings" _
Helpful information is displayed when you
successfully complete "Network settings".
[] Manual setting
[] Error screen
Retry: Go to "Start connection test"
Set later: Go to _
[] About wireless LAN
_ Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable LAN adapters, check the following website:
http ://panasonic.jp/supportJglobal/cs/tv/
_ Check that the Access point supports WPS*.
(If it doesnotsupportWPS,the encryptionkeyoftheAccesspointisrequiredwhenconfiguringsettings.)
_ FollowtheinstructionsontheAccesspointsetupscreenandconfiguretheappropriatesecuritysettings.
FormoredetailsonsettingofAccesspoint,pleaserefertooperatingmanualforthe Accesspoint.
_ We recommend using 11n (5 GHz) for the wireless system between the wireless
LAN adapter and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the
communication speed may be slower.
_ If the wireless system of the Access point is changed, devices that could connect by
wireless LAN may no longer be able to connect.
_ When VIERA CAST, Network camera, or other device is using the network, do not
disconnect the wireless LAN adapter.
_ Keep the TV away from the following devices as much as possible:
Wireless LAN, Microwaves, and other devices that use 2.4 GHz and 5 GHz signals.
Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.
* WPS: Wi-Fi Protected Setup
Adjust the Clock (Set clock)
Select NEXT then press OK to go to the next step.
[] Manual setting
[] Press to return to
the previous screen
RETURN
or
[] Auto setting
Follow the instructions on
screen to complete the
following operations.
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Auto: The clock is adjusted automatically via Internet service, Only
available when the TV is on a network, -->Set "Network settings" first,
ITimezoneISelect your time zone, (EST/CST/MST/PST/AKST/HST/NST/AST)
Set DST (Daylight Saving Time) setting. (On/Off)
On: Advances the clock one hour from the time it is set according to the time
zone.
Complete First time setup
Completion message is displayed when you have successfully completed the
First time setup.
[] Wireless network (First time setup) in _
Display "Wireless network"
_2_Select the connection method
select
_®Follow the directions on screen to complete the setting.
cs See page 45 for more information.
®
"lq
-4
B
O3
t-
16 17
To Next Page
Loading...
