How to Use Menu Functions
31
Menu
Item Adjustments / Configurations (alternatives)
Sound
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
[V-Audio ProSurround]:
Provides a more progressive enhancer and reverberation to simulate improved
spatial effects.
Auto Gain Control
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Volume Correction Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
MPX
Selects multiplex sound mode (if available)
[Stereo]: Use this normally
.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue TV
Digital Audio
Preference
Selects the initial setting for audio tracks [Dolby D] / [MPEG]
[Dolby D]: The priority is given to Dolby Digital.
[MPEG]: The priority is given to MPEG.
●
Dolby Digital is the method of coding digital signals developed by the Dolby
Laboratories.
Apart from stereo (2ch) audio, these signals can also be
multi-channel audio.
●
MPEG is an audio compression method that compresses audio to the smaller
size without any considerable loss of audio quality.
●
For Digital TV
SPDIF Selection
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
For Digital TV or video contents of Media Player / Network services (p. 59, 70)
●
ARC (Audio Return Channel): A function of digital audio output using HDMI
cable
HDMI1 / 2 / 3 / 4 Input
Selects to fit the input signal [Digital] / [Analogue] (p. 86)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
HD
l
s
nd
ss]
on.
e
th-l32_42_47e5a.indb 31th-l32_42_47e5a.indb 31 3/20/2012 12:24:57 PM3/20/2012 12:24:57 PM
To Next Page
Loading...
