55
FAQs, etc.
•
On screen messages
•
Frequently Asked Questions
On screen messages
Feature not available
•
It is not possible to record these sources (COMPONENT / HDMI / PC).
Invalid system time. Please exit !
•
Cannot get the time information. Check the connection of the RF
cable.
Max. number of Timers already set !
•
The maximum number of timer programming events is 15.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profi le and Childlock settings
•
There is a new DVB service or programme.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
•
There is a new software available.
No module inserted
•
Check the CI module inserted completely (p. 29).
No Recording - Check media
•
The tape or disc may be “write protected”, missing or damaged.
Bad Signal
•
The signal is weak. Check the aerial.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
•
Confi rm correct operation.
Are you sure ?
•
Confi rm correct operation.
All tuning data will be erased
•
“Shipping Condition” will erase all tuning data (p. 34).
Message Meaning / Action
No Recording - Already recording
•
The equipment may already be recording.
Invalid operation - Please check settings and
connections
•
Check the Q-Link or VIERA Link connection and setting (p. 42 - 44).
Child Lock is active !
Press OK to enter PIN
•
The selected programme is locked in Child Lock (p. 31).
No DVB Service found
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
To Next Page
Loading...
