Panasonic Viera TX-L32DT30B - Page 41

How to Use Menu Functions
41
Menu Item Adjustments / Configurations (alternatives)
Timer
Timer Programming
Sets programme reminders and records forthcoming programmes (p.58)
•
DVB mode only
Off Timer
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p.19)
Auto Standby
Sets the duration of time that the TV will remain On when no operation is received
from the user [Off] / [2] / [4] (hours)
•
Starting Timer Programming automatically does not affect this function.
•
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
•
The notification message will appear 3 minutes before going to Standby mode.
Setup
TV Guide Settings
TV Guide View
Changes the layout of TV Guide [Normal] / [Full] / [Info]
[Normal] : Default TV Guide screen
[Full] : Displays channels and programmes full-screen without the operation guide
[Info] : Displays details of the selected programme at the bottom without the
operation guide
GUIDE Plus+
Postcode
Sets your postcode to display advertisements in the GUIDE Plus+ system (p.25)
•
Not valid on freesat mode
GUIDE Plus+
Information
Displays the system information of the GUIDE Plus+ system
•
Not valid on freesat mode
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below :
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Recording Setup Formats the connected USB HDD and sets the condition (p. 69)
Link Settings
VIERA Link Settings for VIERA Link functions [Off] / [On] (p.99)
HDMI Content
Detection
Automatically adjusts picture according to received HDMI content [Off] / [Auto]
•
This function is available if the connected equipment supports HDMI Content Type.
•
The content type information will be displayed for several seconds when this function
works.
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
•
Component, PC and HDMI signals cannot be output.
Standby Power Save
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p.100)
•
This function is available when [VIERALink] is set to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On(Noreminder)] (p.100)
•
This function is available when [VIERALink] is set to [On].
Q-Link Download
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Child Lock Applies access control for channels or AV inputs to prevent unwanted access (p.60)