Using Media Player
83
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal.
•
To confirm or change the current sound status “Confirm or change the current status” (p.80)
1 Display the menu 2 Select [Sound] 3 Select [SPDIF Selection] and set
MENU
Main Menu
Picture
Sound
Timer
Setup
2/2
SPDIF Selection
Reset to Defaults
Auto
Reset
access / store
select
access
select
Menu
Item Adjustments / Configurations (alternatives)
Sound
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
DTS is output as DTS.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
Music mode
•
Supported file format (p.109)
The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed.
Example : Thumbnail - [Folder view]
Selected device name
My Music_1 My Music_2 My Music_3
OPTION
Media Player Music
Folder view
SD Card
EXIT
Select
RETURN
Play Folder Contents Select
Info
Access
Option Menu
Drive Select
•
To display the information of the highlighted folder
1/3
My Music_1
11
Folder name
Number of files
Folder number / Total folder number
■ Playback from Folder view
All the files in the selected folder will be played back.
1 Select the folder 2 Start playback
select
(red)
■
To return to TV
EXIT
■
To return to the
previous screen
BACK/
RETURN
To Next Page
Loading...
