Tuning and Editing Channels
56
(Other Sat.) / (Satellite)
You can tune all receivable digital satellite channels and create your channel list, etc.
•
Some of Other Sat. / Satellite functions may work to differing specifications (depending on the broadcasters).
■
To return to TV
EXIT
1
Select freesat or Other Sat.
Select Satellite
TV
2
Display the menu
MENU
3
Select [Setup]
Main Menu
Picture
Sound
Timer
Setup
access
select
4
Select [Other Sat. Tuning Menu]
Select [Satellite Tuning Menu]
Other Sat. Tuning Menu Access
access
select
5
Select one of the following functions
AccessFavourites Edit
Channel List
Auto Setup
Manual Tuning
Other Satellite Tuning Menu
Access
Access
Access
Add New Channels
Signal Condition
Access
Access
access
select
Set all receivable digital satellite channels [Auto Setup]
Any receivable digital compliant satellite channels can be tuned.
•
Only Other Sat. / Satellite channels are tuned or retuned.
•
All the previous tuning settings are erased.
•
If a Child Lock PIN number (p. 60) has been set, it must be entered.
1 Select the satellite and then select [Start]
Satellite Selection Astra2/Eurobird
Other Satellite Auto Setup - Satellite Selection
freesat and other channels
Start
Start
select
•
Check the dish alignment for the satellite
you want to select
• Astra2/Eurobird
p. 10
• Astra1, Hotbird
Please consult the received satellite
broadcasting companies.
•
Selectable satellites are Astra2/Eurobird, Astra1 and Hotbird.
•
If you want to tune from all available satellites, select [Any Satellite].
2 Check the signal condition and the message
Astra2/Eurobird
0
0
10
10
Other Satellite Add New Channels - Satellite Selection
freesat and other channels
Satellite Selection
Signal Quality
Signal Strength
Signal Lock Locked
Continue
Other Satellite Auto Setup
All Other Satellite tuning data will be erased
If you select [Any Satellite], this step is skipped.
•
It takes a while to check the connection for your selected satellite.
•
Ensure that the Signal Lock status is shown as “Locked”.
If it is not locked, the search cannot be executed.
•
If the status is shown as “Not locked” and Signal Quality / Signal Strength have no indications, please check the dish alignment.
If the status is shown as “Not locked” but there are some levels of Signal Quality / Signal Strength indicated, select [Any
Satellite] in Satellite Selection and try again.
To Next Page
Loading...
