Basic Connection
11
Example 3
Connecting DVD Recorder / VCR and Satellite receiver
TV, DVD Recorder / VCR and Satellite
RF OUT
RF IN
RF OUT
RF IN
Rear of the TV
Aerial input terminal
Terrestrial aerial
Mains lead
HDMI AV 2 AV 1 HDMIRecorder/AV
AC 220-240 V
50/60 Hz
Fully wired HDMI
compliant cable
Fully wired
SCART cable
Fully wired
SCART cable
Satellite receiver
DVD Recorder or
VCR
RF cable
RF cable
RF cable
Fully wired HDMI
compliant cable
■ Connecting to the network environment (Network connections)
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setup of the network connection will start after the tuning (when first using the TV) (p. 12 - 14)
Internet
environment
Internet
environment
Wired connection
Wireless connection
Access point
LAN cable (Shielded)
•
Use the Shielded Twist Pair (STP) LAN cable.
Wireless LAN Adaptor and Extension cable
“Optional accessories” (p. 6)
•
Connect to the USB 1, 2 or 3 port.
Rear of the TV
Note
•
For more information of the network connections (p. 71)
Quick Start Guide
To Next Page
Loading...
