Auto Setup
12
Auto Setup
Search and store TV channels automatically.
•
These steps are not necessary if the setup has been completed by your local dealer.
•
Please complete connections (p.10, 11) and settings (if necessary) of the connected equipment before starting Auto Setup.
For details of settings for the connected equipment, read the appropriate manual.
TV
1
Plug the TV into mains socket and switch On
•
Takes a few seconds to be displayed.
•
If the red LED shows on the TV, press the Standby On / Off switch on
the remote control for at least 1 second to turn the TV On.
2
Select your country
Country Selection
United Kingdom Ireland
set
select
Example :
CH 21 68
CH 21 68
62
62
62
10
10
CBBC Channel
BBC Radio Wales
E4
10
62 10Cartoon Nwk
29 -
33 -BBC1
Searching
CH Channel Name Type
Free TV
Free TV
Free TV
Free TV
Analogue
Analogue
Quality
Free TV: 8 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2
Auto Setup - DVB and Analogue
DVB Scan
Analogue Scan
This will take about 6 minutes.
Auto Setup will start to search for TV
channels and store them in the numbered
order as specified by the broadcasters.
•
Actual number of channels may differ due
to channel duplication.
Example :
CH 5 69
62
62
62
10
10
CBBC Channel
BBC Radio Wales
E4
10
62 10Cartoon Nwk
29 -
33 -BBC1
CH 1 99 41H: 21
Searching
CH
Channel Name Type
Free TV
Free TV
Free TV
Free TV
Analogue
Analogue
Quality
Free TV: 8 Pay TV: 0 Radio: 0 Analogue: 2
Auto Setup - DVB and Analogue
DVB Scan
Analogue Scan
This will take about 6 minutes.
0%100%
Sending Preset Data
Please wait!
Remote control unavailable
If Q-Link or similar technology (p. 83)
compatible recorder with analogue tuner
is connected, analogue channel setting is
automatically downloaded to the recorder.
(Digital channel setting is not downloaded.)
•
If downloading has failed, you can
download later through the Setup Menu.
“Q-Link Download” (p. 34)
3
Setup the network connection
Setup the network connection to enable the network service functions such as VIERA
Connect, etc. (p.16, 70).
•
To setup the wireless connection, the Wireless LAN Adaptor (optional accessory) is
required.
Please note that this TV does not support wireless public access points.
•
Ensure the network connections (p. 11) and network environment are completed
before starting setup.
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless Set later
[Wired] “Wired connection” (p. 11)
[Wireless] “Wireless connection” (p. 11)
access
select
•
To setup later on or
skip this step
Select [Set later]
or
EXIT
Quick Start Guide
To Next Page
Loading...
