Using Media Player
67
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal.
•
To confirm or change the current sound status “Confirm or change the current status” (p.68)
1 Display the menu 2 Select [Sound] 3 Select [SPDIF Selection] and set
MENU
Main Menu
Picture
Sound
Timer
Setup
2/2
SPDIF Selection
Reset to Defaults
Auto
Reset
access / store
select
access
select
Menu
Item Adjustments / Configurations (alternatives)
Sound
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
DTS is output as DTS.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
Video Setup
Setup the settings for Video mode.
•
These settings are not available for the formatted USB HDD.
1 Display the option menu
in the thumbnail view
2 Select [Video Setup] 3 Select the items and set
OPTION
Video Setup
Option Menu
Video Preview On
Repeat
Video Setup Menu
Off
access
access / store
select
Menu
Item Adjustments / Configurations (alternatives)
Video Setup
Video Preview
Sets to start the preview of the title or scene in the thumbnail view [Off] / [On]
•
Image may not be displayed for an instant in the thumbnail view. Set the preview [Off]
to resolve this.
Repeat Playback repeat within the title or selected file (depending on the content) [Off] / [On]
To Next Page
Loading...
