EasyManua.ls Logo

Panasonic Viera TX-L32E30B

Panasonic Viera TX-L32E30B
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using Network Services (DLNA / VIERA Connect)
75
5 Select [Connection Test] and access to test
ab-cd-ef-gh-ij-kl
Connection Test Access
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
Network Setup
Wireless
Connected
access
select
Performs automatic testing of the network connection for the TV. (It takes a while
to test.)
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then perform this function again.
If you continue to have difficulty, please contact your internet service provider.
[WPS(Push button)]
1) Please press the ‘WPS’ button on the access
point until its light ashes.
2) When the light is ashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
WPS(Push button)
Connect
press the WPS button on the access point until the light flashes
connect the Wireless LAN Adaptor and the access point
Ensure that your access point supports WPS for this setup.
WPS : Wi-Fi Protected Setup™
[WPS(PIN)]
1 Select your desired access point
1
2
3
Access Point A
SSID
Access Point B
Access Point C
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Available Access Points
No. Wireless type Encrypt Reception
access
select
Ensure that your access point supports WPS for this setup.
To search access points again
(yellow)
For the information of the highlighted access point
To set manually
(red)
2 Enter the PIN code to the access point, and then select [Connect]
Please register the following PIN codes on the
access point.
PIN code : 12345678
Select ‘Connect’ after entering and saving the
settings on the access point.
WPS(PIN)
Connect
[Search for access point]
Access points found automatically are listed.
1 Select your desired access point
1
2
3
Access Point A
SSID
Access Point B
Access Point C
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Available Access Points
No. Wireless type Encrypt Reception
access
select
: Encrypted access point
To search access points again
(yellow)
For the information of the highlighted
access point
To set manually
(red)

Table of Contents

Related product manuals