Panasonic WH-ADC0509L3E5 User Manual

Operating Instructions
Air-to-Water Hydromodule + Tank
Model No.
Indoor Unit
WH-ADC0509L3E5
WH-ADC0509L6E5
WH-ADC0509L3E5AN
WH-ADC0509L6E5AN
Outdoor Unit
WH-WDG05LE5
WH-WDG07LE5
WH-WDG09LE5
ENGLISH
Before operating the system, please read these
operating instructions thoroughly and keep them
for future reference.
WEB-ACXF55-36210-EN

Panasonic WH-ADC0509L3E5 Specifications

General

Brand	Panasonic
Model	WH-ADC0509L3E5
Category	Water Heater
Language	English

Summary

System Overview

Operating Conditions

Safety Precautions

General Warnings and Symbol Explanations

Explains WARNING/CAUTION signs, prohibited actions, and compulsory actions.

Electrical and Power Supply Safety

Safety measures for power supply, cords, and earthing.

Unit and Remote Controller Precautions

Precautions for unit handling, water leakage, and remote controller use.

R290 Refrigerant Safety Guidelines

Safety procedures and precautions when using R290 flammable refrigerant.

Installation and Regulatory Safety Requirements

Safety measures for installation and compliance with national regulations.

Servicing and Work Safety Procedures

Safety protocols for personnel and work practices during servicing.

Leak Detection and Fire Prevention Safety

Procedures for checking refrigerant presence and fire prevention.

Equipment and Electrical Component Safety Checks

Checks for refrigerating equipment and electrical device safety.

Component Repair, Cabling, and Leak Detection Safety

Safety guidelines for component repair, cabling, and leak detection.

Leak Detection and Refrigerant Removal Best Practices

Acceptable leak detection methods and refrigerant removal procedures.

Refrigerant Charging and Decommissioning Safety

Safe procedures for charging refrigerant and decommissioning the system.

Labelling and Refrigerant Recovery Procedures

Requirements for equipment labelling and safe refrigerant recovery.

Recovery Machine and Oil Draining Safety Measures

Safety checks for recovery machines and oil draining procedures.

Protective Zone Guidelines

Protective Zone Installation Diagrams

Illustrations of protective zones for various outdoor unit installations.

Remote Controller Overview

Buttons and Display Indicators

Explanation of remote controller buttons and their functions.

Display Icons and Mode Selection

Explanation of display icons, operation modes, and temperature zones.

Initial System Setup

Language and Clock Configuration

Steps to select language, set clock format, date, and time.

Quick Menu Navigation

Accessing and Using Quick Menu Options

How to display and navigate the various Quick Menu functions.

Quick Menu: Force DHW and Powerful Mode

Using Force DHW to turn Tank DHW on/off and Powerful mode for system operation.

Quick Menu: Quiet Mode and Timer Settings

Operating in Quiet mode and setting timer patterns for quiet operation.

Quick Menu: Force Heater and Force Defrost

How to force the Heater on or off, and initiate Force Defrost.

Quick Menu: Weekly Timer Setup

Setting up, editing, or copying weekly timer patterns for operation.

Quick Menu: Error Reset and Remote Lock

Using Error Reset to restore settings and locking the remote controller.

User Menu Settings

Function Setup: Timers and Modes

Settings for weekly timer, holiday timer, and quiet timer operations.

Function Setup: Heaters, Sterilization, and DHW Mode

Configuration for room/tank heaters, sterilization, and DHW modes.

System Check: Energy, Info, Errors, Compressor, Heater

Viewing energy, system information, error history, compressor, and heater status.

Personal Setup: Remote Control, Sound, Contrast, Backlight

Adjusting remote control number, touch sound, LCD contrast, and backlight.

Personal Setup: Language, Password, Service Contact

Changing display language, setting password, and entering service contact.

Installer Menu Settings

System Setup: PCB, Zones, Sensors, Heater, Anti-freeze

Configuring PCB connectivity, zones, sensors, heater capacity, and anti-freeze.

System Setup: DHW, Tank, Heater, Sensor, Bivalent Settings

Settings for DHW capacity, tank connection, heaters, sensors, and bivalent connection.

System Setup: Bivalent Control Patterns and Settings

Configuring bivalent connection control patterns and related settings.

System Setup: Bivalent Control Details, SG Ready, Smart Control

Advanced bivalent control, SG ready, and smart control setup.

System Setup: Smart Control Pricing and Efficiency

Setting electricity and boiler prices, and boiler efficiency for smart control.

System Setup: Smart Control Seasons and Schedules

Configuring seasons and schedules for smart control operation.

System Setup: External SW and Solar Connections

Configuring external switches and solar connections.

System Setup: Solar AT, Error Signal, Demand Control, SG Ready, Compressor SW, Circulation Liquid

Settings for solar AT, error signal, demand control, SG ready, compressor SW, and circulation liquid.

System Setup: Heat-Cool, Defrost, Heating Control Settings

Configuration for heat-cool switch, defrost, and heating control.

System Setup: External Meter Configuration

Setting up various external meters for generation and electricity.

System Setup: Electrical Anode Setting

Enabling or disabling the electrical anode operation.

Operation Setup Configuration

Heat Mode Temperature Settings

Setting water and ambient temperatures for heating operations.

Heat Mode: Outdoor Temp & Heater Timings

Configuring outdoor temps for heating OFF/ON and heater ON timings.

Cool Mode Temperature Settings

Setting water and AT temperatures for cooling operations.

Auto Mode Switching and Cooling Settings

Automatic heat/cool switching and cooling compensation/direct input.

Tank Operation and Sterilization Settings

Configuring tank floor operation, heat up, reheat, and sterilization.

Service Setup Procedures

Pump Speed and Dry Concrete Settings

Setting pump speed and dry concrete temperatures for construction.

Service Contact and Remote Control Setup

Setting service contacts and configuring remote control usage.

Cleaning and Maintenance

Regular Unit Checks and Water Filter Maintenance

Routine checks for units, water filter cleaning, and pressure checks.

Circuit System Maintenance and User Tasks

Procedures for circuit system maintenance and user responsibilities.

Troubleshooting Guide

Symptom Causes and Pre-Service Checks

Identifying common symptoms, their causes, and initial checks.

Error Code Explanations

List and explanations of various error codes displayed by the system.

Important Information

Network Adaptor and Equipment Disposal

Notes on network adaptor operation and guidelines for equipment disposal.

Symbol Explanations

Explanation of symbols used throughout the manual.