Panasonic WH-ADC0509L3E5AN - User Manual

55 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operating Instructions

Air-to-Water Hydromodule + Tank

Model No.

Indoor Unit

WH-ADC0509L3E5

WH-ADC0509L6E5

WH-ADC0509L3E5AN

WH-ADC0509L6E5AN

Outdoor Unit

WH-WDG05LE5

WH-WDG07LE5

WH-WDG09LE5

ENGLISH

Before operating the system, please read these

operating instructions thoroughly and keep them

for future reference.

WEB-ACXF55-36210-EN

Table of Contents

Other manuals for Panasonic WH-ADC0509L3E5AN

Installation Manual32 pages

Service Manual7 pages

Questions and Answers

M
Maria CabreraAug 13, 2025
Why is my Panasonic Heat Pump system hard to heat up?
- J
  Joseph AllenAug 13, 2025
  Several factors can affect the heating performance of your Panasonic Heat Pump. If the panel and floor are heated simultaneously, the warm water temperature may decrease, reducing the system's heating ability. Low outdoor air temperature or a low preset water outlet temperature can also extend the heating time. Additionally, obstructions like snow blocking the discharge outlet or intake inlet of the outdoor unit can impede performance.
J
James TaylorAug 16, 2025
Why does my Panasonic Heat Pump system not heat up instantly?
- N
  Nina WalkerAug 16, 2025
  If your Panasonic Heat Pump starts operating with cold water, it will take some time to heat the water to the desired temperature. The system requires a period to warm up the water.
W
walkersamuelAug 20, 2025
Why my Panasonic Heat Pump outdoor unit does not operate?
- U
  ufigueroaAug 20, 2025
  The outdoor unit might not be operating due to the system's protection control. This typically occurs when the outdoor temperature is outside of the unit's operating range.
N
Natalie ReyesAug 25, 2025
Why is my Panasonic Heat Pump making a loud refrigerant noise?
- M
  Matthew GrahamAug 25, 2025
  The loud refrigerant noise you hear is due to the protection control during the de-ice operation. This occurs when the outdoor ambient temperature is lower than -10 °C.
L
Linda PriceAug 28, 2025
Why is there a delay when restarting my Panasonic Heat Pump?
- G
  Greg BoydAug 28, 2025
  The delay you're experiencing after restarting your Panasonic Heat Pump is a built-in protection mechanism for the compressor.
D
Donna JohnsonAug 31, 2025
Why is the backup heater automatically turning on in my Panasonic Heat Pump even when disabled?
- M
  Mrs. Anne Gutierrez DVMAug 31, 2025
  The backup heater might be automatically turning on, even when disabled, because of the protection control of the indoor unit heat exchanger.
J
Julian HughesSep 4, 2025
Why does my Panasonic Heat Pump start automatically when the timer is not set?
- B
  bonnie58Sep 4, 2025
  The automatic operation could be due to the sterilization timer being set.
J
John WhiteSep 8, 2025
Why is COOL mode unavailable on my Panasonic Heat Pump?
- C
  Carol JeffersonSep 8, 2025
  The system might be locked to operate in HEAT mode only, which would explain why COOL mode is unavailable.

Summary

System Overview

General Safety Precautions

Power Supply Safety

Safety instructions related to the power supply and electrical connections.

Refrigerant Safety Precautions

R290 Refrigerant Handling

Safety guidelines for handling R290 refrigerant and preventing fire hazards.

Leak Detection and Handling

Methods and precautions for detecting and handling refrigerant leaks.

Charging and Decommissioning Safety

Safety procedures for refrigerant charging and decommissioning the system.

Installation and Servicing Safety

Installation Safety Guidelines

Requirements for safe installation of the unit, including space and pipe-work protection.

Servicing Safety Procedures

Procedures and personnel requirements for safe servicing and maintenance of the system.

Remote Controller Operation

Button Functions and Indicators

Explanation of the remote controller's buttons and their functions.

Display Icons and Modes

Description of the LCD display elements, including mode selection and operation icons.

Quick Menu Functions

User Menus: Function Setup

Timer Settings (Weekly, Holiday, Quiet)

Settings for weekly timer, holiday timer, and quiet timer operations.

User Menus: System Check

Energy Monitor and System Information

How to monitor energy usage and view system status.

Error History and Compressor Status

Checking error logs and compressor performance data.

Installer Menus: System Setup

Installer Menus: Advanced Settings

Bivalent Connection and Control

Enabling bivalent connection and configuring its operation modes.

Installer Operation Setup: Heating

Heating Water Temperature Adjustments

Troubleshooting Guide

Common Operation Symptoms and Causes

Error Codes and Diagnostic Checks

Lists error codes and basic checks to perform before calling for service.

Summary

System Overview

General Safety Precautions

Power Supply Safety

Safety instructions related to the power supply and electrical connections.

Refrigerant Safety Precautions

R290 Refrigerant Handling

Safety guidelines for handling R290 refrigerant and preventing fire hazards.

Leak Detection and Handling

Methods and precautions for detecting and handling refrigerant leaks.

Charging and Decommissioning Safety

Safety procedures for refrigerant charging and decommissioning the system.

Installation and Servicing Safety

Installation Safety Guidelines

Requirements for safe installation of the unit, including space and pipe-work protection.

Servicing Safety Procedures

Procedures and personnel requirements for safe servicing and maintenance of the system.

Remote Controller Operation

Button Functions and Indicators

Explanation of the remote controller's buttons and their functions.

Display Icons and Modes

Description of the LCD display elements, including mode selection and operation icons.

Quick Menu Functions

User Menus: Function Setup

Timer Settings (Weekly, Holiday, Quiet)

Settings for weekly timer, holiday timer, and quiet timer operations.

User Menus: System Check

Energy Monitor and System Information

How to monitor energy usage and view system status.

Error History and Compressor Status

Checking error logs and compressor performance data.

Installer Menus: System Setup

Installer Menus: Advanced Settings

Bivalent Connection and Control

Enabling bivalent connection and configuring its operation modes.

Installer Operation Setup: Heating

Heating Water Temperature Adjustments

Troubleshooting Guide

Common Operation Symptoms and Causes

Error Codes and Diagnostic Checks

Lists error codes and basic checks to perform before calling for service.

Panasonic WH-ADC0509L3E5AN Specifications

General

Brand	Panasonic
Model	WH-ADC0509L3E5AN
Category	Water Heater
Language	English

Related product manuals

Preview: Panasonic WH-ADC0509L3E5

Panasonic WH-ADC0509L3E5

Panasonic WH-ADC0509L6E5

Panasonic WH-ADC0509L6E5AN

Preview: Panasonic WH-ADC0309J3E5UK

Panasonic WH-ADC0309J3E5UK

Preview: Panasonic WH-ADC0309J3E5AN

Panasonic WH-ADC0309J3E5AN

Preview: Panasonic WH-TD20E3E5

Panasonic WH-TD20E3E5

Preview: Panasonic DH-6SM1

Panasonic DH-6SM1

Preview: Panasonic DH-30HAM

Panasonic DH-30HAM

Preview: Panasonic DH-6SM1PW

Panasonic DH-6SM1PW

Panasonic PAW-BTANK300L

Panasonic PAW-BTANK200L

Preview: Panasonic PAW-TD20B8E3-1

Panasonic PAW-TD20B8E3-1