Panasonic WR-DA7 - Chapter 2 DA7 Tour

15
8
The Self Check Function is incorporated in the Digital
Audio Mixer WR-DA7.
1. Test Equipment Required
8
The following Test Jigs are required for Self Check and
Service of the WR-DA7.
8
AD EXTD-1 (Part Number : YWA0EA1196AN) between
the Power-2 Board and AD/DA Board as shown in fig. 1-1.
Fig. 1-1
8
SLOT EXTD (Part Number : YWA0EA1198AN) for the
optional Board as shown in fig. 1-2.
Fig. 1-2
8
AD EXTD-2 (Part Number : YWA0EA1199AN) between
the Main Board and AD/DA Board as shown in fig. 1-3.
Fig. 1-3
8
PC RTN (Part Number : YWA0EA1200AN) for the PC
Connector as shown in fig. 1-4.
Fig. 1-4
8
RS232/485 RTN (Part Number : YWA0EA1202AN) for
RS232C/485 Connector as shown in fig. 1-5.
Fig. 1-5
8
MTBR RTN (Part Number : YWA0EA1203AN) for the
Meter Bridge Connector as shown in fig. 1-6.
Fig. 1-6
SELF CHECK FUNCTION