Panasonic WV-CF624

17
Installation of camera
Turn off the power of all related devices before installation.
1 Remove the camera dome cover.
2 Connect all cables.
If necessary, bind the cable with cable tie (locally procured).
3 Install the camera (The illustration below shows installation using a gang junction box (locally
procured) ).
Mount the camera with 2 screws (M4, locally procured).
Important:
•Besuretoavoidtwistingthecableswhentighteningthescrews.
Note:
•Whenattachedtotheceiling:
Install the camera with its front (Model number indication face) facing the direction opposite to
the “
TOP”arrowoftheinstallationmark(“ FRONT” direction of the installation template label
in the accessories).
•Whenattachedtothewall:
Install the camera with the “
TOP”arrowoftheinstallationmarkfacingupward.
Installation
Screws
(M4, locally procured)
Installation
mark