36
● Auto Focus Setting (AF MODE)
1. Move the cursor to AF MODE, and select the following mode by
moving the joystick to the right or left.
The factory default setting is MANUAL S.
S, M and L stand for Small, Middle and Large areas in the center
of a scene that are used for sensing sharpness in auto-focusing.
MANUAL S, M, L: Brings the camera into focus when the AF key
on the controller is pressed.
AUTO S, M, L: Brings the camera into focus while operating pan,
tilt or zoom manually. These may be selected in the same way
as selecting MANUAL by pressing the AF key on the con-
troller.
2. To confirm auto-focus operation, press CAM (SET) key while the
cursor is at AF MODE.
Notes:
• The auto focus lens does not function properly in AUTO after
using WIDE lens.
• The auto focus lens may not function properly in AUTO under the
following conditions.
1. Dirt or water on window glass.
The auto focus may focus on the dirt or water.
2. Low lighting/illumination or zone marker is blinking.
3. Bright objects or high intensity objects.
4. Single color with unfigured object such as white wall or fine
felt.
5. No center objects, sloping objects.
6. Far and near objects on the screen.
To Next Page
Loading...
