Panda MD22 Series User Manual

MD22xx barcode scanner quick guide
 A standard packing includes a scanner, a USB cable and a CD (or a user manual).
 Accessories include a stand, a RS232 cable, a 5V adaptor and a PS/2 cable.
 Use a piece of dry and soft cloth when cleaning the scanner.
Parts of the scanner
① LED
② Exit window
③ Trigger
④ Cable interface port
⑤ Release-hole of the cable
⑥ Beeper
Installing the cable
1. Switch off the host;
2. Refer to the below pictures, connect the host with the scanner based on different cables;
3. Ensure that all connections are secure.
4. Switch on the host system. If installation is successful, the beeper will beep and LED will
light.
USB cable RS232 cable PS/2 cable
Removing the cable
1. Find the release-hole.
2. Insert a thin wire into the hole and pull out the cable gently.
Default value initialization and Firmware version list
Default value initialization Firmware version list
Programming instruction and example
Assembling the stand (accessory)
1. See the figure above, tighten the screws.
2. Bend the neck to the desired position for scanning.
Scan
“
SETUP
”
Scan
“
Option bar code
”
Scan
“
the
1
st c
h
aracter of option
”
Scan
“
the
2
nd character of option
”
Scan
“
END
”
Example: to set
Flow
control
to be XON/XOFF.

Panda MD22 Series Specifications

General

Brand	Panda
Model	MD22 Series
Category	Barcode Reader
Language	English

Summary

Installing the Cable

Removing the Cable

Default Value Initialization and Firmware Version

Default Value Initialization

Instructions for resetting the scanner to its default settings.

Programming Instruction and Example

Guide on how to program scanner settings using provided examples.

Firmware Version List

Information regarding the scanner's firmware version.

Assembling the Stand