Package contents:
Handheld Wand Scanner Calibration Sheet USB Power Adapter USB Cable
Cleaning Cloth microSD card Storage pouch
Quick Start Guide User Guide PageManager Software (on microSD card)
3
Turn scanner on
Press and hold the Scan button for 2 seconds.
Wait until both green and red LEDs turn o.
4
Calibrate the scanner
a. Lay the calibration sheet on a flat surface, printed side up.
b. Place the scanner on the white area of the calibration sheet.
c. Press and hold both the Scan and PDF JPG buttons for 3
seconds to turn on and enter the calibration mode.
d. When C01 appears on the LCD and the red LED flashes, slide the
scanner down across the white area of the calibration sheet.
e. When the first scan is finished, C02 appears on the LCD.
f. Slide the scanner back up over the white area.
g. When the calibration is complete, 777/888 appears on the LCD,
and then the scanner automatically turns o.
h. Carefully place the calibration sheet back into the plastic sleeve and store until next use.
2
Handheld Wand Scanner
PANSCN08
Customer Support: http://www.pandigital.net/support
1
Insert and Charge the battery
Before the first time use, make sure the battery
is installed as shown.
Charge the battery until the red LED turns green.
Quick Start Guide
Connect to computer or Connect to USB Power Adapter
Insert microSD card
Insert an unlocked (writable) microSD card into
the memory card slot.
Continued