16
TYPES AND CROSS SECTIONS OF POWER CABLES
SINGLE-PHASE POWER SUPPLY
Cross section 3 x 0.75 mm
2
ATTENTION!
When replacing power cable, the installer shall have protective ground conductor (B) with larger length
than phase conductors (refer to Fig. 15) and shall observe the requirements stated in para. 8.
WARNING: MAINTENANCE CAN BE PERFORMED ONLY AND
EXCEPTIONALLY BY THE AUTHORIZED PERSONNEL.
In case of failure or cable breaking, remove it and don’t touch it.
Moreover, the product shall be disconnected from socket and
flame shall not be ignited. Contact with the nearest authorized
service centre for solving the problem.
To Next Page
Loading...
