EasyManua.ls Logo

Panther 135 User Manual

Default Icon
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL 55  135
    
Model 55
Model 135
Ratedformotorsupto55
horsepowerand250lbs.
Ratedformotorsupto135horse-
powerand350lbs.
CUSTOMER MUST RECEIVE THIS MANUAL
AT TIME OF SALE OR AFTER INSTALLATION
Rev 1/16
PN 99-55321
Question and Answer IconNeed help?

Do you have a question about the Panther 135 and is the answer not in the manual?

Panther 135 Specifications

General IconGeneral
BrandPanther
Model135
CategoryMarine Equipment
LanguageEnglish

Summary

Mounting the Trim & Tilt Bracket

Prepare Transom Mounting Holes

Positioning, marking, drilling pilot and main holes, and applying sealant.

Mount Bracket to Transom

Use bolts, washers, and nuts; tighten evenly, securing upper and lower bolts.

Mounting the Motor

Bolt-on Outboard Mounting

Mount motor using bolts, washers, and nuts; drill additional holes if needed.

Clamp-On Outboard Mounting

Use wood shim and tighten clamps securely for clamp-on motors.

Electrical Connections

Mount Control Box and Switch

Secure control box and push button switch to convenient locations.

Operating Tips

Maintenance

Troubleshooting

Unit Does Not Run

Check battery, motor, relay control, and push button switch for power issues.

Unit Runs in One Direction Only

Troubleshoot relay control and push button switch for directional problems.

Related product manuals