EasyManua.ls Logo

Panther 55 User Manual

Panther 55
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL 55  135
    
Model 55
Model 135
Ratedformotorsupto55
horsepowerand250lbs.
Ratedformotorsupto135horse-
powerand350lbs.
CUSTOMER MUST RECEIVE THIS MANUAL
AT TIME OF SALE OR AFTER INSTALLATION
Rev 1/16
PN 99-55321
Question and Answer IconNeed help?

Do you have a question about the Panther 55 and is the answer not in the manual?

Panther 55 Specifications

General IconGeneral
ConstructionFiberglass
Length55 ft
Engine OptionsDiesel
Cabins4
Berths8
Head3

Summary

Introduction

Getting Started

Tools and Equipment

Lists necessary tools for installation.

Hardware and Supplies

Lists required hardware and supplies not included with the unit.

Before Starting

Measuring Mounting Bolts

Guidance on selecting correct bolt length for transom and motor mounting.

Checking Cable and Hose Slack

Ensures motor hoses and cables have sufficient slack after installation.

Mounting the Trim & Tilt Bracket

Mounting the Motor

Bolt-on Outboards

Instructions for mounting the motor using bolts.

Clamp-On Outboards

Instructions for mounting the motor using clamp-on method.

The Breather Tube

Electrical Connections

Operating Tips

Trailering Precautions

Important safety advice for trailering the boat with the motor lift.

Fishing Operation

Recommendation for motor position during fishing to avoid obstructions.

Recommended Accessories

Suggests additional Panther products for trolling.

Maintenance

Electrical Connection Check

Periodic inspection and maintenance of electrical connections.

Salt Water Use

Guidelines for using the unit in salt water environments, including anode use.

Adding Grease

Procedure for adding grease to the actuator gear case when needed.

Troubleshooting

Unit Does Not Run

Procedures to diagnose and resolve issues when the unit fails to operate.

Unit Runs in One Direction

Troubleshooting steps for units that only operate in a single direction.

Noise and Low Power

Addresses grinding noises and reduced power output from the unit.

Related product manuals