Panther 55 - Clamp-On Outboards

3.Leavingapproximatelya1/2inchspace,ghtentheclampssecurely.

4.Beforefinalinstallaon,slowlyrunthebracketuptoafulllttocheckforinterferencewiththeclamp
bracketortheclamphandles.Reposionthemotorasnecessary.

5.Aachsecurityboltstothebracketbydrillingmounngholesintothebracketthatmatchthesizeand
locaonofthesecurityboltholesontheoutboardbracket.Alsousecableesorothermeanstosecure
theclamphandlestopreventaccidentallooseningduringoperaon.