Panther 55 - The Breather Tube

THE BREATHER TUBE

Theactuatortoyourmotorliisdesignedforsafeboanguse.However,becauseofitsprecisiondesign,it
isequippedwitha“breathertube”toallowtheactuatortohavefullupanddownfuncon.Thebreather
tubeMUSTbemountedinawaytopreventwaterintake.Thebestlocaonforthisisunderthehoodofthe
motor.

1.Removethecoverfromtheoutboardmotor
2. Insertthebreathertubethroughanexisngopeninginthebaseofthemotor,orifnecessary,drilla
3/8inchholeforaccess.
3.Makingsurethereisplentyofslackinthetubetoallowforfullmovementofthemotor,aachthe 
 breathertubeinsidethemotorcompartmentinalocaonthatwillnotbeaffectedbymovingengine
 parts.Usecableestoinsurethattheendofthetubestayshighupinthecompartmenttoprevent
 accidentalwaterintake.ThetubeMUSTbeinstalledsothatnowatercangetinsidethebreather
 tube.