Instruction Manual
FOXY PRO
PASSION OF MOVEMENT www.panther.tv5
5. Check-List for assemby
Please check which conguration is best for your shooting.
The following criteria have to be considered:
• height • limits in weight
• working distance • payload required
• spatial limits • access to shooting place
Take your time to securely assemble, to check and to test the system before use.
1. Transport
Do not expose / subject the outriggers and rods to heavy blows or
impacts; do not bend ropes.
2. Auxiliaries Water level
Support device (e.g. small ladder, tripod, etc.)
3. Ground No slope: check with water level
Create level surface in case of a slope
If the ground’s loading capacity is lower than 3000 kg/ m² the load
has to be distributed with an adequate foundation
4. Basis No slope: check with water level
foundation with min. 3000 kg/ m² load capacity
5. Assembly Check whether all necessary parts are present
Assemble according to instructions
Observe safety instructions
confirmation for stability against overturningavailable
CAUTION !
If the outrigger is loaded in only one direction, outriggers have to be
supported under the load center of gravity. It is obligatory to observe the
safety instructions of the operating manual.
To Next Page
Loading...