To Next Page

To Previous Page

3.1.1.3. Method III: Connect the printer via wireless network

Please check if the printer is connected with wireless network when installing the printer driver

software. If disconnected, please install it with reference to Chapter 3.1.1.3.1. If connected,

please install it with reference to Chapter 3.1.1.3.2.

Note:

• You can print "Network configuration page" to confirm printer network connection

status to see if printer is connected with network (Please see Chapter 11.6 for how to

print).

3.1.1.3.1. The printer is not connected with wireless network

3.1.1.3.1.1. Configure wireless network via USB cable and install driver

Since some computers are not provided with wireless network function, this section is divided into

"Connect computer to router via Wi-Fi" and "Connect computer to router via wired connection" to

introduce installation process.

I．Connect computer to router via Wi-Fi

1. Computer is already connected to router via Wi-Fi.

2. Connect the printer to computer via USB cable, then power the printer on.

3. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Vista/Server 2008 system: Pop up "Autoplay" interface, click “Autorun.exe” to run

the installation procedure.

• Windows 8 system: When the “DVD RW driver” window pops up from the right top corner of

Computer desktop, click anywhere in the pop-up window, then click “Autorun.exe” to run the

installation program.

• Windows 10 system: When the “DVD RW driver” window pops up from the lower right corner of

Computer desktop, click anywhere in the pop-up window, then click “Autorun.exe” to run the

installation program.

Note:

• Some computers may be unable to auto play the CD beacase of system configuration.

Please double click "Computer" icon, find "DVD RW driver", then double click "DVD RW

driver" to run the installation procedure.

4. Read and agree to the terms contained in the End User License Agreement and the Privacy

Policy, click the “Next” button in the lower right corner of the interface to enter the driver

installation interface.

5. Click the "One-click installation" button in Method III to install driver software.

Pantum CM1100ADN User Manual

Questions and Answers: