Pantum M6500NW Plus Series User Manual

95
11.1.6. Firmware update
This printer supports firmware upgrade with its control panel without a computer.
1. Switch on the printer and then connect it to network.
2. Press "Menu" to enter the Menu Settings interface.
3. Press "▲" or "▼" to select "System Setting" and then press "OK".
4. Press direction key "▲" or "▼" to choose the option “firmware update”, and press “OK”.
5. Please follow instructions to operate. After completion, please reboot the printer.
Note:
• If the firmware fails to be downloaded, please reboot the printer and then operate again.

Pantum M6500NW Plus Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	20, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Scanner Type	Flatbed
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Maximum Copy Pages	99 pages
Copy Zoom Range	25% - 400%
Scan Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
Connectivity	WiFi, USB 2.0, Ethernet
Copy Speed	22 cpm
First Print Out Time	Less than 7.8s
Recommended Monthly Page Volume	250 to 2, 000 pages
First Copy Out Time	Less than 10s
Media Sizes	A4, A5, A6, B5, Letter, Legal, Executive
Media Types	Plain, Thick, Thin, Recycled, Label, Card, Envelope
Weight	7.5 kg
Mobile Printing	Pantum App
Toner Yield	1, 600 pages