Pantum M6500NW Plus Series User Manual

4
Note:
• The power switch of the printer is divided into two types: “touch type” and “self-locking
type”. The actual appearance of the purchased printer will prevail.
• The “touch type” power switch of the printer only has one mode, and can be reset by
short-pressing.
1) ON: short-press the power switch in the OFF state to turn on the power supply of the
printer.
2) OFF: long-pressure the power switch for about 3s in the ON state to turn off the power
supply of the printer.
• The “self-locking type” power switch of the printer has two modes: lock and disconnect.
1) ON: short-press the power switch in the OFF state to turn on the power supply of the
printer.
2) OFF: short-press the power switch in the ON state to turn off the power supply of the
printer.
Rear View
1
USB Interface
For connecting product to computer with USB cable.
2
Network Interface
For connecting product to network with network cable.
3
Power Interface
For connecting product to power with power cord.
Note:
• Printer appearance may differ because of various models and functions, so the schematic
diagram is only for your reference.

Pantum M6500NW Plus Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	20, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Scanner Type	Flatbed
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Maximum Copy Pages	99 pages
Copy Zoom Range	25% - 400%
Scan Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
Connectivity	WiFi, USB 2.0, Ethernet
Copy Speed	22 cpm
First Print Out Time	Less than 7.8s
Recommended Monthly Page Volume	250 to 2, 000 pages
First Copy Out Time	Less than 10s
Media Sizes	A4, A5, A6, B5, Letter, Legal, Executive
Media Types	Plain, Thick, Thin, Recycled, Label, Card, Envelope
Weight	7.5 kg
Mobile Printing	Pantum App
Toner Yield	1, 600 pages