EasyManuals Logo

Pantum M6500NW Plus Series User Manual

Pantum M6500NW Plus Series
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
37
3.2.2.2.2.5.. Add printer to macOS system
I. Add up the printer via USB
1. Connect the printer to computer with USB cable and then turn power on.
2. Enter the “System Preferences” – “Printers & Scanners” of computer.
3. Click button to select “Add Printer or Scanner”.
4. Select printer and then select the corresponding printer mode from the “Use” menu popping out.
5. Click “Add”.
II. Add up the printer via wireline connection (applicable to wired network models)
1. Turn the power of printer and computer on.
2. Connect the computer to wired network.
3. Connect the network cable to the network interface of printer, and make sure the printer is
connected to the computer network (Please refer to Section 4 for network setup).
4. Enter the “System Preferences” – “Printers & Scanners” of computer.
5. Click button to select “Add Printer or Scanner”.
6. Select printer and then select the corresponding printer mode from the “Use” menu popping out.
7. Click “Add”.
III. Add up the printer via wireless connection(applicable to Wi-Fi models)
1. Turn the power of printer and computer on.
2. Make sure the wireless network connection between computer and printer is set up.
Note:
• In case of basic structure mode, connect wireless network printer to the access point
(wireless router). Please refer to Section 5.1 for connection method.
• In case of Wi-Fi Direct mode, connect wireless client to wireless network printer directly.
Please refer to Section 5.2 for connection methods.
3. Enter the “System Preferences” – “Printers & Scanners” of computer.
4. Click button to select “Add Printer or Scanner”.
5. Select printer and then select the corresponding printer mode from the “Use” menu popping out.
6. Click “Add”.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M6500NW Plus Series and is the answer not in the manual?

Pantum M6500NW Plus Series Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Monthly Duty Cycle20, 000 pages
Input Capacity150 sheets
Output Capacity100 sheets
Scanner TypeFlatbed
Processor600 MHz
Memory128 MB
Duplex PrintingManual
Maximum Copy Pages99 pages
Copy Zoom Range25% - 400%
Scan Resolution1200 x 1200 dpi
FunctionsPrint, Copy, Scan
Supported Operating SystemsWindows, Mac OS, Linux
Print Speed22 ppm (A4)
ConnectivityWiFi, USB 2.0, Ethernet
Copy Speed22 cpm
First Print Out TimeLess than 7.8s
Recommended Monthly Page Volume250 to 2, 000 pages
First Copy Out TimeLess than 10s
Media SizesA4, A5, A6, B5, Letter, Legal, Executive
Media TypesPlain, Thick, Thin, Recycled, Label, Card, Envelope
Weight7.5 kg
Mobile PrintingPantum App
Toner Yield1, 600 pages

Related product manuals