1.5.Control Panel
1.5.1.Overview of control panel
The layout of the printer control panel is shown below:
Control panel without the fax feature
No.
Name
Functions
1
LCD Display
Display operation interface and product information.
2
Copy Button
Press this button to enter into copy mode.
3
Scan Button
Press this button to enter into scan mode.
4
ID Card Copy Button
Press this button to enter into ID Card Copy mode.
5
Wi-Fi button
6
Bill Copy Button
Press this button to enter into Bill Copy mode.
7
Cancel
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of
Copies" to 01.
8
Start Button
This is used to start relevant operations after finishing operation
settings.
In case of a feed failure, please press this key for pick-up and
printing again.
Start Wi-Fi function (applicable to Wi-Fi model only).
When Wi-Fi is connecting, press the button for 2s or longer to
cancel Wi-Fi connection; when Wi-Fi is connected, press the
button for 2s or longer, "Wi-Fi connection" interface will pop
up, and select "Disc from RT" to disconnect Wi-Fi connection
(only for Wi-Fi model).
Open save toner function(applicable to non-Wi-Fi model only).
To Next Page
Loading...
Need help?
General