Pantum P2500 Series User Manual

56
7.3. Manual Duplex
1. The printer driver supports manual duplex.
Note:
•If the paper is thin, it may wrinkle.
• If the paper is curled, make it flat and put it back into the manual feeder tray or automatic
feeder tray.
• If the manual duplex function causes a paper jam, see Section 10.1 for handling it.
2. Ensure that certain amount of paper is loaded into the automatic feeder tray before printing.
Note:
• For loading paper, see Section 2.2.
• For the type of media that can be printed with the automatic feeder tray, see Chapter
2.1. It is recommended to use the standard paper.
• Some paper media are not suitable for the duplex printing. Trying the duplex printing
with it may damage the printer. When Paper Type is Thick or Transparency, please do not
try Duplex Printing. If 2 x 2 Poster Print is checked in the Printing Preferences dialog box,
Manual Duplex will not be supported.
• Paper will get jammed or cannot be fed in when the automatic feeder tray is loaded with
more than 150 sheets.
3. Printing steps are as follows (for Windows system only) :
a) Open the document to be printed from the application (such as Notepad), and select Print from
the File menu

Pantum P2500 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Dimensions	337 x 220 x 178 mm
Processor Speed	600 MHz
Memory	128 MB
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8s
Operating System Support	Windows, Mac, Linux
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Thick, Cardstock, Label, Envelope, Thin
Media Weight	60 - 163 g/m²