10
4. Load the paper into the automatic tray with the print-side up.
• Before loading paper, please unfold the stacked paper to avoid a paper jam or feed
error,and then load the paper into the tray print-side up.
5. Adjust the paper stop to keep the paper in position. To ensure normal paper feeding, adjust the
bottom paper stop ① into the slot to keep it from slipping out, and then adjust the blue stop② to
match the paper size.
• Paper may get jammed or cannot be fed in when the automatic tray is loaded with more
than 150 sheets.
• When using the printed paper, please make the side to be printed (the blank side) up.
• When printing on A5 paper, it is recommended that the paper is fed in landscape
orientation, which can extend the service life of the laser toner cartridge.
To Next Page
Loading...
Need help?
General
