3-8
3) Printer List
After searching for printers, the program will automatically enter the "Select Printer" interface.
Users can select the found printer or add printer by manually adding IP or Host Name.
Note: • When the installer prompts you to select a printer, you can select the
appropriate printer name from the Detected Printer;
• If the printer name does not appear in the Detected Printer, please click Refresh
and search for printers on the network;
• If you know the IP address of the printer to be connected, you can select Specify
an IP Address for Installation to enter the printer's IP address for connection.
4) Printer Installation Interface
Click on "Next" in the "Printer List" interface, the program will enter the "Printer Installation"
interface. After the installation is completed, it will enter the "Installation Complete" interface,
and exit in 3 seconds and set the printer as default.
To Next Page
Loading...
Need help?
General